4. Press the P power button on the remote control or projector.
Remote control | Projector | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 32 for details.
If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 48 for details.
The projector takes about 30 seconds to warm up and display an image. If you don’t see a picture, you may need to change the image source as described on page 24.
Turning Off the Projector
1.Turn off any equipment connected to the projector.
2.Press the P power button on the remote control or projector. When you see a confirmation message, press the P power button again to turn the projector off.
3.When the P power light stops flashing orange and stays on, turn off the projector’s main power switch on the back.
It is now safe to unplug the projector, if necessary.
Caution: Turn off this product when not in use to prolong the life of the projector. Continuous
Setting Up the Projector 23