Replacing the Lamp
The projection lamp lasts for up to 4000 hours. You can use the Info menu to check how long it’s been in use (see page 55). It’s time to replace the lamp when:
■The projected image gets darker or starts to deteriorate.
■The projector’s lamp light flashes red at
■The message Replace the lamp appears on the screen when you start projecting.
Lamp light
Note: Lamp life results will vary depending on mode selected, environmental conditions, and usage.
Turn off this product when not in use to prolong the life of the projector.
You can purchase lamp part number V13H010L49 (ELPLP49) from an authorized Epson reseller. To find the nearest reseller, please call
Be sure to read the “Important Safety Information” on page 71 before replacing the lamp.
Warning: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury.
Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.
Follow these steps to replace the lamp:
1.If the projector is on, press the P Power button and wait for the light to stop flashing.
2.Turn off the power switch on the back of the projector.
3.Unplug the power cord and any cables.
4.Wait about an hour to make sure the lamp is no longer hot.
52 Maintenance