Resetting the Projector

If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings.

To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select Reset, and confirm as needed. The example below shows how to reset the Image menu settings:

Open the Image menu . . .

and select Reset

You can also reset the lamp usage timer or restore all the projector settings to their original values. Follow these steps:

1.Press the Menu button on the remote control.

2.Open the Reset menu.

3.Do one of the following:

■Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero. You should reset the lamp timer only when you install a new projector lamp. See page 55 for more information.

■Select Reset Memory to clear all memory settings.

■Select Reset All to return all projector settings to their original defaults (except Component, Save Memory, Language, and Lamp).

Making Detailed Adjustments 45