Follow these guidelines when the control panel lights come on or flash:

P is on

The P power light is on when the printer is on and ready to print. It

 

flashes when the printer is receiving a print job, charging ink, or

 

cleaning the print head.

 

 

S flashes

When the S paper out light flashes, you have a paper jam. Turn off the

 

printer and gently pull out all the paper. Make sure none of the sheets

 

are curled, creased, old, stuck together, or too thin. Then reload the

 

stack against the right edge guide and slide the left edge guide over to

 

the paper’s left edge. Then turn the printer on.

 

 

S is on

When the S paper out light comes on, your paper is out or incorrectly

 

loaded. Make sure none of the sheets are curled, creased, old, stuck

 

together, or too thin. Then reload the stack against the right edge

 

guide and slide the left edge guide over to the paper’s left edge. Press

 

the E load/eject button to resume printing.

 

 

B or A flash

When an ink out light flashes, your ink supply is low. Make sure you

 

have a replacement cartridge (black S020187, color S020191).

 

 

B or A are on

When an ink out light comes on, you need to replace the ink cartridge.

 

Make sure you have a replacement cartridge (black S020187, color

 

S020191). See page 31 for replacement instructions.

 

 

P and S flash

When the P power and S paper out lights flash and the B black and A

and

color ink out lights come on, jammed paper may be blocking

B and A are on

movement of the print head. Turn off the printer, wait a few seconds,

 

and turn it back on. If no paper ejects, turn off the printer, remove the

 

jammed paper, and turn it on again. If the lights still flash, contact your

 

dealer or EPSON; see page 53 for contact information.

 

 

P S B A flash

When all the lights flash, your printer may have an internal error. Make

 

sure you removed all the packing material as described on the

 

unpacking sheet in your printer box. Then turn off the printer, wait a

 

few seconds, and turn it on again. If the lights still flash, contact your

 

dealer or EPSON; see page 53 for contact information.

 

 

P S B A are off

When all the lights are off, the printer is not receiving power. Try

 

these solutions:

 

■ Make sure the printer is turned on.

 

■ Turn off the printer, plug in the power cord securely, and turn on

 

the printer again.

 

■ Make sure the outlet is operable and is not controlled by a switch

 

or timer.

 

■ Try using another outlet.

 

 

42