5.Follow the instructions on screen to install the software. EPSON Digital PhotoLab is installed first. Click Finish when that installation is complete. At the next screen, click OK to install your printer software and Status Monitor. (There may be a brief pause before the installation begins; if you are installing the software from diskettes, only the printer software and Status Monitor are installed.)
Be sure to click Next to install the Status Monitor. When the installation is complete, you must reboot your computer for the Status Monitor to take effect.
Your printer software and EPSON Digital PhotoLab icons appear in the EPSON folder and an icon for your printer appears in the Printers folder. The EPSON Stylus Photo 700 printer is set as your default Windows printer.
An icon 
for EPSON Digital PhotoLab also appears on your desktop. To launch this program,
Note:
If your computer is on a network and the printer is connected to a remote server, you now need to set up the computer as a client. See Appendix A of your User’s Guide for instructions.
Caution:
If you’re setting up your computer for the first time, you may see a message asking if you want to install a printer. Be sure to select Cancel and complete your Windows 95 setup.
If at any time you see the New Hardware Found screen and Windows 95 asks you to insert a driver diskette, always select Cancel. You can’t install your software that way.
7. Continue with “Register Your Printer” on page 15.9