Printer Setup

Setting up your printer is easy. Just follow the simple steps on the following pages. Before you set up your printer, make sure your system meets the requirements listed in the Introduction of your User’s Guide.

1 Unpack the Printer

Remove any packing material from the printer. See the Notice Sheet in the box for details. Save all the packaging so you can use

it if you need to transport the printer later.

You need the following items to set up your printer:

 

■ Your printer and paper support

 

paper support

 

 

Ink cartridges (black and color)

 

color ink

 

■

 

cartridge

 

 

 

 

 

printer

 

 

 

■

CD-ROM with your printer

 

 

 

 

 

 

 

 

software and EPSON Digital

 

 

 

 

PhotoLab

 

 

 

■

Printer cable (not included)

black ink

CD-ROM

 

 

 

 

 

cartridge

(located on the back of

 

 

 

 

 

 

Note:

 

this guide)

 

 

 

 

 

 

To connect to a PC, you’ll need a shielded, twisted-pair parallel printer

 

 

cable (6 to 10 feet long). To connect to a Macintosh, you’ll need an

 

 

Apple® System Peripheral-8 cable (Belkin brand recommended).

 

Place the printer flat on a stable desk near a grounded outlet. Leave plenty of room

 

in back for the cables and enough room in front for opening the output tray.

 

Do NOT put the printer:

 

 

 

■

In an area with high temperature or humidity

 

 

 

 

 

 

 

■

In direct sunlight or dusty conditions

 

 

 

 

 

 

 

■

Near sources of heat or electromagnetic interference, such as loudspeakers

 

 

 

 

or cordless telephone base units.

 

 

2

Be sure to follow all the Safety Instructions in your User’s Guide.