Epson 700 5 Load Paper, Connecting to a Macintosh, 1. Turn off the printer and your Macintosh, 2.Fan a stack of plain paper and then even the edges

Connecting to a Macintosh

1. Turn off the printer and your Macintosh.2. Connect the cable to the serial connector on the back of the printer.

3. Connect the other end of the cable to either the modem port or the printer port on your Macintosh.

Note:

If you’re using a PowerBook™ with a combination printer/modem port, use that port and select modem in the Chooser. Make sure AppleTalk® is inactive before turning on the printer.

5 Load Paper

1.Slide the left edge guide all the way to the left and pull out the output tray extensions.

2.Fan a stack of plain paper and then even the edges.

3.Load the stack with the printable surface face up. Push the paper against the right edge guide.

left edge guide

output tray extensions

Note:

Don’t load paper above the arrow mark inside the left edge guide.

Keep unused paper in its original packaging and store it in a cool, dark place.

6