5.Follow the instructions on screen to install the software. EPSON Digital PhotoLab is installed first. Click Finish when that installation is complete. At the next screen, click OK to install your printer software. (There may be a brief pause before the installation begins; if you are installing the software from diskettes, only the printer software is installed.)

Your printer software icons appear in the EPSON folder and an icon for your printer appears in the Printers folder.

An icon for EPSON Digital PhotoLab appears on your desktop. To launch this program, double-click the icon. For details about the program, see page 15.

6.Follow the instructions in your Windows NT 4.0 documentation to set up the workstations to share the printer.

7.Continue with “Register Your Printer” on page 15.

Installing the Software on a Macintosh

1.Make sure your printer is connected to your Macintosh and both are turned off.

2.Turn on your Macintosh and turn off your virus protection programs, as necessary.

3.Once your Macintosh is fully started, turn on your printer.

4.Insert the EPSON Stylus Photo 700 CD-ROM or Disk 1 if you’re using diskettes. Double-click the EPSON CD-ROM or diskette icon if it doesn’t open automatically.

5.If you’re installing from the CD-ROM, double-click the Printer Software Installer icon. If you’re installing from diskettes, double-click the Installer icon. Then click Continue.

Note:

If you are installing your software for the first time, you must install the printer software before you install EPSON Digital PhotoLab.

13