Connecting the Mouse Cable

To use the remote control as a wireless mouse, you need to connect a mouse cable: either the round PS/2 or the flat USB mouse cable.

1.Connect one end of the appropriate mouse cable to the PS/2Mouse/Com port or the USB Mouse port on the projector.

note

See page 34 for instructions on using the remote control as a wireless mouse.

You can use the USB port for a mouse only on systems configured originally with Windows® 98, Me, 2000, or XP. If you upgraded your system from Windows 3.1 or 95, the USB port may not work as a mouse port.

2.Connect the other end to your laptop’s external mouse or USB port.3.If necessary, configure your laptop to work with an external mouse.

If you don’t need to make any other connections, you can plug in and turn on your equipment; see page 23 for instructions.

Connecting the Audio Cable

If you’ll be using audio through your projector’s speakers, you need to connect a stereo, mini-jack audio cable (not included).

1.Connect one end of the audio cable to the Audio In port on the projector.2.Connect the other end to the laptop’s headphone or audio out jack.

note

If you need additional volume (in a large auditorium, for example), you can also connect external speakers or a public address system to the projector. See page 21 for instructions.

Setting Up the Projector 11