Connecting to External Speakers or a PA System

The projector’s speaker is loud enough for most small- or medium-size rooms. For large rooms or maximum volume, you can connect the projector to external speakers or a public address (PA) system.

You’ll need an RCA-to-3.5 mm stereo audio cable, which may be included with your sound system or may be purchased from an electronics store.

Before you start, make sure the projector and speakers or PA system are turned off.

1.Connect the cable’s 3.5 mm stereo miniplug to the projector’sAudio Out jack.

2.Connect the RCA plugs to the speaker or PA system. Insert the cable’s red plug into the Audio R jack and the white plug into the Audio L jack.

note

The projector’s internal speaker is disabled when you use an external audio system.

Setting Up the Projector 21