Adjusting the Image

You can make a variety of image adjustments with the Video menu. The options available in the menu depend on which source is connected to the projector: computer or video.

Computer or component video source menuVideo source menu

Video menu

Menu item

Description

 

 

Position

Moves the displayed image up, down, left, or right. Use the Enter button to move the

 

screen position in the corresponding direction.

 

 

Tracking*

Removes vertical lines from the computer image by matching the projector’s internal

 

clock to various computer graphic signals.

 

 

Sync*

Corrects fuzziness or screen flicker by synchronizing the projector with the computer’s

 

tracking signal. Always adjust the Tracking before adjusting the Sync.

 

 

Brightness

Lightens or darkens the overall image. Increase brightness to lighten an image, or

 

decrease it to darken the image. Press the right or left side of the Enter button to

 

adjust the setting and see the results.

 

 

Contrast

Adjusts the difference between light and dark areas. Increase the contrast to make

 

light areas lighter and dark areas darker. Decrease it to minimize the difference

 

between light and dark areas. Press the right or left side of the Enter button to adjust

 

the setting and see the results.

 

 

Color**

Adjusts the color depth of the video input source. Increase the color setting for more

 

intense color on the screen, and lower the setting for less intense color. Press the

 

right or left side of the Enter button to adjust the setting and see the results.

 

 

Tint**

Adjusts the tint of the video image colors. Increasing the Tint setting strengthens the

 

red tint. Decreasing it strengthens the green tint. Press the right or left side of the

 

Enter button to adjust the setting and see the results.

 

 

Fine-Tuning the Projector 41