Epson PowerLite 745c Projector

You see this screen listing all registered projectors:

Note: To delete a projector from the list, highlight the projector name, and click Delete.

5.Click Close. You see the status of each of your registered projectors on the main EMP Monitor screen:

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors using the Status, Video Source, and Error icons shown below. These let you see which projectors are currently being used, from which source (or port) they are projecting an image, and if a problem occurs.

 

 

 

 

 

 

 

 

 

 

 

 

Status icon

Video Source icon

 

Error icon

 

Note: To monitor a projector when it’s in standby mode (plugged in but not projecting), you must first select Network ON as the Standby Mode setting in the projector’s Extended menu.

For detailed status information, select the projector and click View details.

The following tables explain the status, video source, and error icons. (Additional unsupported icons also appear.)

Status icons

(green)

Projecting; no problems

 

 

(dark)

Turned off; no problems

 

 

(green)

Projecting; problems detected

 

 

(dark)

Turned off; problems detected

 

 

 

Network error (for example, not connected to

 

network or power cable disconnected).

 

You may also see this error if Network OFF is

 

selected in Standby Mode.

 

 

Video source icons

Computer/Component 1

Computer/Component 2 (not available for the

PowerLite 745c)

S-Video

Video

EasyMP

Error icons

Lamp replacement notification (the lamp is nearing the end of its life; see page 22)

High-speed cooling in progress (the projector is getting too hot but continues to operate)

Overheating (projection turned off automatically)

Lamp out or lamp cover open

Fan error

Sensor error

Internal problem

8/04

Epson PowerLite 745c Projector - 19