E p s o n P o w e r L ite 7 4 5 c P r o je c to r

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor screen let you turn the projectors on and off and select video signals. (Hold the mouse pointer over a button to see a description of its meaning.) Select the projector you want to operate (with the mouse pointer) before clicking one of the buttons.

Control buttons

If you need the most current status information about your projectors, click the Refresh button.

Note:

To turn on a projector when it’s in standby mode (plugged in but not projecting), first select Network ON as the Standby Mode setting in the projector’s Extended menu.

Configuring the Monitoring Interval

You can select how often EMP Monitor checks the projector status:

1.From the Tool menu, select Configuration. You see this screen.

Note:

If you want EMP Monitor to run whenever you start your computer, click Add to Startup.

2. Select the desired update interval and click OK.

Understanding the Notification Messages

If a projector experiences a problem, it can send an e-mail message to each of the addresses you provided using EMP NetworkManager. The message includes the heading “Epson Projector” in the subject line. The body of the message contains the name of the projector, the projector’s IP address, and a description of the problem. The problem descriptions are similar to the errors reported by EMP Monitor listed on page 19.

If a plus (+) sign appears before the description, it indicates that a problem has occurred. A minus (–) sign appears when the problem is resolved.

Note:

If a projector develops a critical problem, it may not be possible for it to report the error.

Projector Status Lights

The lights on top of the projector indicate the projector’s status and let you know when a problem occurs.

Power light

Lamp light

Temperature light

Power

Lamp

Temperature

 

light

light

light

Description

Flashing

Off

Off

The projector is warming up.

green

 

 

Wait for the image to appear.

Green

Off

Off

The projector is operating

 

 

 

normally.

Flashing

Off

Off

The projector is cooling

orange

 

 

down. Wait for the light to

 

 

 

stop flashing and remain

 

 

 

orange before unplugging it.

Red

Flashing

Flashing red

There is an internal error in

 

red

 

the projector. Turn off the

 

 

 

projector and unplug it.

 

 

 

Contact Epson for help.

Red

Off

Flashing red

There is a problem with the

 

 

 

fan or a sensor. Turn off the

 

 

 

projector and unplug it.

 

 

 

Contact Epson for help.

20 - Epson PowerLite 745c Projector

8/04