EPSON Stylus Photo 750 Revision A

Disassembly and Assembly Disassembly 74

4.2.5.12 Cartridge Sensor(Sensor, I/C) Removal
1. Remove one screw securing “Bush Holder, Sensor, I/C” to the
carriage assembly, and remove it.
Figure 4-26. Bush Holder, Sensor, I/C Removal
2. Remove “Harness, I/C” from the clamp part of the carriage.
Figure 4-27. Removing Harness
3. Release 4 hooks(2 outer hooks, 2 inside hooks), which secure
“Holder, Sensor, I/C” with the carriage assembly”, and remove the
“Holder, Sensor, I/C” upward.
Figure 4-28. Holder,Sensor, I/C Removal
4. Release 2 hooks of the hook, which secure the sensor to the
carriage assembly”, and remove the sensor and harness.
Screw Bush Holder,
Sensor, I/C
Harness
Engaging Holes Outside Hook
Holder Sensor, I/C
Inside Hook
Outside Hoo
k
Engaging Hole
Carriage Assembly
Engaging part
of inside hook