Epson 750 5.3.7 Initial Ink Charge

EPSON Stylus Photo 750 Revision A
Adjustment Adjustment by Adjustment Program 88
5.3.7 Initial Ink Charge
There is no ink charged in the ink path of a spare print head and printer
mechanism. Therefore, after you replace any of the following units,
perform initial ink charge and return the printer after making sure that
ink is ejected correctly from the print head. Perform initial ink charge at
the following cases.
„After replacing the printer mechanism
„After replacing or removing the print head
1. Select “Maintenance” on the main menu and press Return key. The
screen goes to the Maintenance Menu.
2. Select “Initial Charge Flag Reset” and press Return key. Then, the
screen goes to the “Initial Ink Charge Check Menu”.
3. If you wish to perform the initial ink charge, press Return key. If not,
press ESC key.
It takes about 2 minutes to complete the initial ink charge.
Auto
Prompt-SP750
adj1
7
CAUTION
„Initial ink charge is performed, when the printer,
which is left at least 10 seconds after turning the
power Off, is turned back On again.
„Since this operation consumes large amount of ink,
do not perform unnecessarily.
adj18
Auto
Prompt-SP750