Epson 77c Changing Presentation Slides, Projector Status Lights

PowerLite S5 Series / 77c Projector

Changing Presentation Slides				Power	Lamp	Temp.
				light	light	light	Description
You can use the remote control to click through slideshow-style				—	Flashing	Off	Replace the lamp with a new
presentations (such as PowerPoint®) from up to 20 feet away.					orange		one as soon as possible. If you
This gives you more flexibility, since you don’t need to stand							continue to use the lamp, there
							is a risk it may break.
near your computer to change slides.
				Red	Flashing	Off	The lamp is burned out, broken,
To change slides with the remote control, make sure you have
					red		or not installed correctly; or the
connected your computer to the projector with a USB cable.
							lamp cover is open. Close the
To advance slides in a							cover or replace or reseat the
							lamp, if necessary. Also, clean
PowerPoint presentation in
							the air filter and air vents. If you
Slide Show mode, press the							are using the projector at an
Page up button on the remote							altitude above 4900 ft (1500 m),
control.							turn on High Altitude mode as
Press the Page down button							the Operation setting in the
							Extended menu. If these
to go back a slide.							suggestions don’t work,
Note:							contact Epson.
You cannot use the remote control as a mouse.				Red	Off	Red	The projector has overheated
							and turned itself off. Let it cool
							for about five minutes, then
							turn it back on. Make sure there
Projector Status Lights
							is plenty of space around and
							under the projector for
The lights on top of the projector indicate the projector’s status							ventilation. Also clean the air
							filter and air exhaust vents. If it
and let you know when a problem occurs.
							continues to overheat, you may
							need to replace the air filter.
	Power light
				Red	Off	Flashing	The projector is too hot. Make
						orange	sure the temperature
							surrounding the projector does
	Lamp light						not exceed 95 °F (35 °C) and
							there is plenty of space around
Temperature light
							and under the projector for
							ventilation. Clean the air filter
If the projector is not working correctly, first turn it off and							and air vents, if necessary.
							See page 12 for instructions.
unplug it. Then plug the power cord back in and turn on the
projector. If this does not solve the problem, check the status				Flashing	Off	Off	The projector is shutting down.
lights on top of the projector and try the solutions				orange			Wait for the light to stop
recommended in the following table.							flashing and remain orange
							before unplugging it.
Power	Lamp	Temp.		Orange	Off	Off	The projector is in standby or
light	light	light	Description				sleep mode. You can unplug it
							or press the PPower button to
Flashing	Flashing	Flashing	There is an internal error in the
							turn it on.
red	red	red	projector. Turn the projector off
			and unplug it. Contact Epson for	Flashing	Off	Off	The projector is warming up.
			help.	green			Wait for the image to appear.
Red	Off	Flashing	There is a problem with the fan
				Green	Off	Off	The projector is operating
		red	or a sensor. Clean the air filter				normally.
			and air vents. If this does not
			solve the problem, turn the
			projector off and unplug it.
			Contact Epson for help.

10 - PowerLite S5 Series / 77c Projector 3/08