PowerLite S5 Series / 77c Projector

Using the Remote Control

The remote control uses a line-of-sight infrared signal. It lets you access the projector’s features from anywhere in the room— up to 20 feet away. (This distance may be shorter if the remote control batteries are low.)

The projector may not respond to remote control commands in these conditions:

You are too far away—not within 20 feet (6 meters)—or not within 30° to the left or right of the front or rear sensor or 15° above or below it

The battery is weak or not installed correctly

Ambient light is too bright

A fluorescent light is shining into the infrared receiver

A strong light source (such as direct sunlight) shines into the infrared receiver

Other equipment emitting infrared energy is present (such as a radiant room heater)

If a button on the remote control has been held for more than 30 seconds, the remote enters sleep mode. Press another button for normal operation.

Remote Control Buttons

 

Selects another

 

image source

Turns

 

projector

 

on or off

Cancels current

 

function or

 

displays previous

Displays or hides

menu or screen

 

projector menus

 

Selects a menu

Changes the

option or displays

aspect ratio of

the next screen

images from

or menu; Auto

4:3 to 16:9

function

 

automatically

Freezes the

adjusts computer

current video

images to the

or computer

optimum settings

image

 

Cycles through

 

8 color modes

 

Page Up and

Turns off audio

Page Down control

and video;

PowerPoint slides

press again to

 

resume

E-Zoom zooms in on (enlarges) selected area and E-Zoom reduces the zoomed image

Replacing Remote Control Batteries

When the batteries run out, follow the steps below to replace them. The remote requires two AA alkaline batteries.

Note:

The remote control automatically shuts off when it detects a button being pressed for more than 30 seconds. This conserves battery life. It can be helpful, for example, when the remote is in a carrying case and the Power button is accidentally pushed.

Caution:

When replacing batteries, take the following precautions:

Replace the batteries as soon as they run out. If a battery leaks, wipe away the battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately.

Do not expose batteries to heat or flame.

Dispose of used batteries according to local regulations.

Remove the batteries if you won’t be using the remote control for a long period of time.

3/08

PowerLite S5 Series / 77c Projector - 11