PowerLite S5 Series / 77c Projector

7.Gently insert the new lamp along the guide rail. If it doesn’t fit easily, make sure it’s facing the correct way. Push the lamp down firmly where the label PUSH appears.

Caution:

Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.

8.Once the lamp is fully inserted, tighten its screws.

9.Lower the lamp cover into place. (The opening should be almost covered, and the top of the cover should be flush with the top of the projector.) Then slide the cover closed and tighten the screw.

Note:

Be sure to seat the lamp fully and secure the lamp cover. If the lamp is not properly installed or the cover is loose, the lamp will not turn on.

10. Reset the lamp timer as described in the next section.

Resetting the Lamp Timer

You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp warning message. Follow the steps below.

Note:

Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used.

1. Connect the power cable and turn on the projector.

2.Press the Menu button on the remote control or projector and select the Reset menu. Then press Enter. You see the following:

3.Select Reset Lamp Hours and press Enter. You see a confirmation screen.

4.Select Yes and press Enter.

5.Press Esc to return to the main menu or the Menu button to exit the menu system.

Transporting the Projector

The projector contains many glass and precision parts. If you need to transport it, please follow these packing guidelines to prevent damage to the projector:

❏When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector.

❏When transporting the projector as freight or checked luggage, first put it in the supplied carrying case, then pack it in a firm box, using cushioning around the case.

❏When you are hand-carrying the projector, be sure to use the supplied carrying case.

Note:

Epson shall not be liable for any damages incurred during transportation.

14 - PowerLite S5 Series / 77c Projector

3/08