PowerLite S5 Series / 77c Projector

❏If your image looks like or , you need to adjust the

keystone correction value. Press the or buttons on the projector to correct the shape of the image. After correction, your image will be slightly smaller.

PowerLite S5 Series

PowerLite 77c

❏On the PowerLite 77c, you may need to turn on Auto Keystone in the Settings menu. See your User’s Guide for instructions.

You can also make keystone adjustments using the projector’s Settings menu, as described in the User’s Guide.

Adjusting the Brightness

The brightness of an image depends on the source you are projecting and the amount of light in the room. If the image is too bright or not bright enough, here are two ways you can adjust it:

❏Change the Brightness setting in the Image menu.

❏Select Low or High for the Brightness Control option in the Settings menu. Low brightness mode extends the life of the lamp and decreases the fan noise.

Correcting Computer Images

If you’ve connected a computer and the image doesn’t look right, or it doesn’t fit properly on the screen, press the Enter button on the projector or the Enter/Auto button on the remote control. This automatically resets the projector’s tracking, sync, resolution, and position settings. You must be projecting a computer image for this button to have any effect. Additionally, if the Auto Setup option in the Signal menu is set to OFF, the Auto function will not work.

Adjusting the Volume

You can use the Vol– and Vol+ buttons on the remote control to increase or decrease the volume for the projector’s built-in speaker.

Note:

You can also adjust the volume using the projector’s Settings menu. See your User’s Guide for details.

On the PowerLite 77c, you can also use the buttons on the projector to control the volume. Press the button to increase the volume, or the button to decrease it. A volume gauge appears on the screen while the volume is being adjusted.

PowerLite 77c only

Note:

You must adjust the volume separately for each input source.

Adjusting the Color Mode

You may want to adjust the color mode to select a different setting that is appropriate for the image you’re projecting and the environment in which you’re projecting it. Press the Color Mode button on the remote control.

If you’re projecting computer or RGB video images, the default color mode is Presentation, which is appropriate for full-color presentations in bright rooms.

8 - PowerLite S5 Series / 77c Projector

3/08