You see the Browse for Printer window:

.

Click to expand

the network path

Select your network printer

7.Click the + next to Entire Network, then click the + next to Epson_lpr and select your printer. (Make sure the IP address matches your print server’s IP address.)

8.Click OK, then click OK again. Click Apply on the Details tab.

9.To test the connection, click the General tab and click Print Test Page. Wait for the page to print.

If the test page prints, click Yes, then click OK to close the Properties window.

If it fails to print, try the following:

■Make sure that the printer and print server are connected and that both are turned on.

■Check WP-Admin to make sure you have a signal (see page 16).

■Make sure you clicked Apply in step 8.

Now you’re ready for wireless printing. For instructions, see the Printer Basics book that came with your printer.

26