If Your Macintosh Has an AirPort Wireless Adapter

■Make sure AirPort is enabled in the AppleTalk Control Panel. If your Macintosh and AirPort Base Station or access point are connected over an existing Ethernet network, select Ethernet in the AppleTalk Control Panel.

■Make sure that both AppleTalk and TCP/IP are enabled in your AirPort utility.

■To use the printer in infrastructure mode, select a working connection to a base station or access point from the AirPort Networks list.

Note the name of the AirPort Network. If you have a Windows computer on your wireless network, use this name as your computer’s SSID (Service Set Identifier). For instructions on setting the SSID, see the documentation for the wireless adapter in your Windows computer.

■To use the printer in computer-to-computer (ad hoc) mode, create or join a computer-to-computer network. See your AirPort documentation for details.

EPSON recommends that you use the print server with an AirPort Base Station or access point. With AirPort, your print server works more reliably in infrastructure mode than computer-to- computer (ad hoc) mode.

■If you want your AirPort network to be password protected, you need to change your password to a hexadecimal value. Follow the instructions beginning on page 44 to install and configure your software.

31