Windows System Requirements

For printing with the EpsonNet 802.11b Wireless Print Server, make sure each computer meets the following requirements:

■A Microsoft® Windows compatible PC or laptop with a Pentium® processor or later, 200 MHz or faster recommended

■Windows 95, Windows 98, Windows Me, Windows NT® 4.0, Windows 2000, or Windows XP

■32MB of RAM (64MB recommended)

■100MB of free hard disk space (200MB or more recommended)

■VGA or better display adapter and monitor

■CD-ROM or DVD drive for installing the printer software

In addition, each computer needs to be connected to an existing wired network that has a wireless access point, or needs to have a wireless adapter installed.

■An access point may be combined with a hub or router or may be a separate unit. For a current list of supported access points, see EPSON’s web site at: http://support.epson.com.

■Wireless adapters can be installed in a PCMCIA slot on a laptop, a PCI slot in a desktop computer, or connected through a USB port.

Make sure your wireless adapters(s) work in ad hoc mode if you want to print without an access point. For a list of supported adapters, see EPSON’s web site at: http://support.epson.com.

To connect the print server to your printer, you also need a high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long) with a D-SUB, 21-pin, male connector for the print server and a 36-pin Centronics® compatible connector for your printer.

4