Epson 8100 Changing the frequency of remote control signal, Using as a simple PC mouse & keyboard

Remote control

Changing the frequency of remote control signal

The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, attempt to change the signal frequency. In order to set the Mode, please keep pressing the combination of two buttons listed below simultaneously for about 3 seconds.

VIDEO COMPUTER		SEARCH
ASPECT		AUTO	BLANK
MAGNIFY	HOME	PAGE UP	VOLUME
ON
	END	PAGE DOWN	MUTE

(1)	Set to Mode 1:NORMAL... MUTE and RESET buttons	(2)	OFF		(1)
			FREEZE MY BUTTON	KEYSTONE
(2)	Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons		1	2
			- FOCUS + -	D-ZOOM +

Please remember that the REMOTE FREQ. in the SERVICE item of the OPTION Menu (46) of the projector to be controlled should be set to the same mode as the remote control.

POSITIONMENU

ENTER

ESC RESET

Using as a simple PC mouse & keyboard

The accessory remote control works as a simple mouse and keyboard of the PC, when the projector's USB port (B type) connects with the PC's USB port (A type) port via a mouse cable.

(1)HOME key: Press HOME button.

(2)END key: Press END button.

(3)PAGE UP key: Press PAGE UP button.

(4)PAGE DOWN key: Press PAGE DOWN button.

(5)Mouse left button: Press ENTER button.

(6)Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.

(7)ESC key: Press ESC button.

(8)Mouse right button: Press RESET button.

USB port

USB

(1)	VIDEO	COMPUTER	SEARCH		(3)
	ASPECT		AUTO	BLANK
	MAGNIFY	HOME	PAGE UP	VOLUME
(2)	ON				(4)
	OFF	END	PAGE DOWN	MUTE
	FREEZE	MY BUTTON		KEYSTONE
		1	2

WARNING ►Improper use of the simple mouse & keyboard function could damage your equipment. While using this function, please connect this product only

to a PC. Be sure to check your PC’s manuals before connecting this product to the PC.

(5)	- FOCUS +	- D-ZOOM +
	POSITION	MENU
		ENTER
	ESC	RESET

(7)

(6)

(8)

NOTE • When the simple mouse & keyboard function of this product does not work correctly, please check the following.

-When a USB cable connects this projector with a PC having a built-in pointing device (e.g. track ball) like a notebook PC, open BIOS setup menu, then select the external mouse and disable the built-in pointing device, because the built-in pointing device may have priority to this function.

-Windows 95 OSR 2.1 or higher is required for this function. And also this function may not work depending on the PC’s configurations and mouse drivers.

-You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

-This function is activated only when the projector is working properly. This function is not available while the lamp is warming up (the POWER indicator blinks green), and while adjusting the volume and display, correcting for keystone, magnifying the screen, using the BLANK function, or displaying the menu screen.

15