Epson 8100 user manual Input Menu, Video Format, Frame Lock

INPUT Menu

INPUT Menu (continued)

Item Description

The video format for S-VIDEOport and VIDEO port can be set.

(1)Use the ◄/► buttons to select the input port.

(2)Using the ▲/▼ buttons switches the mode for video format.

	AUTO ó NTSC ó PAL ó SECAM
VIDEO FORMAT	N-PAL ó M-PAL ó NTSC4.43
	• This item is performed only for a video signal
	from VIDEO port or S-VIDEOport.
	• The AUTO mode automatically selects the optimum mode.
	• The AUTO operation may not work well for some signals. If the
	picture becomes unstable (e.g. an irregular picture, lack of color),
	please select the mode according to the input signal.

	Set the frame lock function on/off for each port.
	(1) Using the ▲/▼ buttons to select one of
	following ports.
	COMPUTER (IN)1 ó COMPUTER (IN)2
	(2) Using the ◄/► buttons to turns the
FRAME LOCK	frame lock function on/off.
	TURN ON ó TURN OFF
	• This item can be performed only on a signal with a vertical
	frequency of 50 to 60 Hz.
	• When the TURN ON is selected, a moving pictures are displayed
	more smoothly.
	• This function may cause a certain degradation of the picture. In
	such a case, please select TURN OFF.

The computer input signal type for COMPUTER IN1 and IN2 ports can be set.

(1)Use the ◄/► buttons to select the input port to be set.

COMPUTER (IN)1 ó COMPUTER (IN)2

(2)Use the ▲/▼ buttons to select the

COMPUTER IN computer input signal type.

SYNC ON G ON ó SYNC ON G OFF

Selecting SYNC ON G ON allows reception of sync on G signal.

• When SYNC ON G ON is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal.

(continued on next page)

34