note
When Direct Power is turned on, press the
PPower button to turn the projector off, wait until the Ppower light turns a steady orange, then unplug the power cord.
■Projection
Front: Projector is in front of the screen.
Front/Ceiling: Projector is in front of the screen, mounted
Rear: Projector is behind the screen.
Rear/Ceiling: Projector is behind the screen, mounted
■Operation
Direct Power: When this feature is enabled, projection starts as soon as you plug in the power cord. You don’t have to press the P Power button.
Sleep Mode: When this feature is enabled, the projector lamp automatically turns off when the projector has not received any input signals for 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. To resume projecting, press the P Power button.
■Standby Mode
Set to Network ON to monitor your projector over a network and perform other network functions when the projector is in standby mode.
■COM Port
Turn on USB only if you’re controlling the projector from a computer with the EMP Link 21L software. This software can be downloaded from the Epson website at support.epson.com. (You must turn the projector off and then on again to use the new setting.)
■Language
Select the language to be used for the projector menus.
4.When you’re finished, press Esc or Menu.
60