note

Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used.

Esc button

Enter button

Menu buttton

Menu button

Esc button

Enter button

Resetting the Lamp Timer

You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp warning message. Follow these steps:

1.Connect the power cable and turn on the projector.

2.Press the Menu button on the remote control or projector and select the Reset menu. Then press Enter. You see the following:

3.Select the Lamp-Hours Reset option and press Enter. You see the following:

4.Select Yes and press Enter.

5.Press Esc to return to the main menu or the Menu button to exit the menu system.

76Maintaining and Transporting the Projector