EPSON
9.Slide the edge guides (➀) to the middle of the paper guide base. Then close the paper guide cover (➁).
Always close the printer cover before printing. The printer does not print when the cover is open.
10.Turn on the printer. You may need to check and change the printer driver settings. When the printer receives data, it automatically loads the paper and starts printing. The printed pages are fed over the paper guide toward the back of the printer.
After you finish printing, follow the steps in the next section to tear off your printed document. If the first printed line on your page appears too high or low, you can change its position by using the micro adjust feature as described in “Adjusting the
Never use the knob to adjust the
To remove the printed document, follow these steps:
1.Make sure the Tear Off/Bin lights are flashing. (This indicates your paper is at the current
2.Open the paper guide cover, and tear off the printed document using the
Never use the knob to adjust the
If the paper perforation is not properly aligned with the
3.Close the paper guide cover.
4.To remove the remaining paper from the printer, press the Load/Eject button to feed the paper backward to the standby position. Then open the tractor sprocket covers and remove the paper.
When you resume printing, the printer automatically feeds the paper back to the
Always tear off your printed document before you press the Load/Eject button. Reverse feeding several pages at a time may cause a paper jam.
16 - EPSON | 4/99 |