EPSON FX-980

State of

Beep

Problem

 

panel lights

pattern

Solution

 

 

 

n Paper Out

•••

No paper is loaded in the selected paper source.

n Pause

 

 

 

Load paper in the printer. Then press the Pause

 

 

 

 

button to turn off the Pause light, if necessary.

 

 

 

 

•••

The paper is not loaded correctly.

 

 

 

 

 

Remove your paper and reload it. Then press the

 

 

Pause button to turn off the Pause light, if

 

 

necessary.

 

 

 

 

•••

Paper is jammed in the printer.

 

 

 

 

 

Clear the paper jam as described in “Clearing Paper

 

 

Jams” on page 24.

 

 

 

f Paper Out

•••

Continuous paper is not fed to the standby

n Pause

 

position.

 

 

 

 

 

Tear off the printed document at the perforation;

 

 

then press the Load/Eject button. The printer feeds

 

 

the paper to the standby position. Press the Pause

 

 

button to turn off the Pause light.

 

 

 

 

•••

A single sheet of paper is not fully ejected.

 

 

 

 

 

Press the Load/Eject button to eject the sheet.

 

 

Then press the Pause button to turn off the Pause

 

 

light, if necessary.

 

 

 

 

•••

Paper is jammed in the printer.

 

 

 

 

 

Clear the paper jam as described in “Clearing Paper

 

 

Jams” on page 24.

 

 

 

f Pause

The print head is overheated.

 

 

 

 

 

Wait a few minutes; the printer resumes printing

 

 

automatically once the print head cools.

 

 

 

f Paper Out

An unknown printer error has occurred.

f Pause

 

 

 

Turn off the printer and leave it off for several

f f

 

 

minutes; then turn on the printer again. If the error

Tear Off/Bin

 

 

recurs, contact your dealer.

f f Font

 

 

 

 

 

 

n= on, f = flashing

•••= short series of beeps (three beeps)

••••• = long series of beeps (five beeps)

The printer beeps once if you press a control panel button when the corresponding function is not available.

Paper Positions

Top-of-Form Position

The top-of-form position is where the printer starts printing on single sheets or continuous paper.

The letters ABC are printed at the top-of-form position

Tear-off Position

Your continuous paper is in the tear-off position when the perforation is aligned with the tear-off edge. You can easily tear off your printed document at this position.

Standby Position

Your continuous paper is in the standby position when it is attached to the tractor but not loaded in the printer.

Available Paper Paths

Your printer provides a variety of paper paths for single sheets and continuous paper. This section describes how paper feeds into the printer from the top, front, bottom, or rear. You can select the paper path that best suits your printing needs.

Status Monitor

Printing on Continuous Paper

The EPSON Status Monitor 2 utility comes with your printer but is available only for use with Windows 95 or 98. It allows you to monitor your printer’s status, alerts you when printer errors occur, and provides troubleshooting instructions.

You can choose from three tractor positions (front push, rear push, and pull) and three paper entry slots (front, rear, and bottom) for printing on continuous paper. This section helps you determine which paper paths and tractor positions are best for your continuous paper printing needs.

4/99

EPSON FX-980 - 7