Epson 9840 RS232 SETUP MODE COMMAND SUMMARY

INTERFACE MODEL 9840 VER 6.0.2
RS232 SETUP MODE COMMAND SUMMARY
@(addr)
╠═ U User Data Entry
║ ╠═ V View current settings
║ ╠═ A (channel)(number) # Set Base Area
║ ╚═ L (number) # Set Base Length
║
╠═ A Analog Output
║ ╠═ V View current settings
║ ╚═ S (item)(unit)(full)#(zero)# Set analog output
║
╠═ S Sensor Select
║ ╠═ A View current sensor on A
║ ╠═ B View current sensor on B
║ ╠═ V View current sensors
║ ╠═ S (channel)(serial number)# Select sensor by S/N
║ ╚═ D (serial number)# Delete sensor by S/N
║
╠═ C Calibration
║ ╠═ C Shunt Check load cell
║ ╠═ B (see text for format) Begin load cell calibration
║ ╠═ E Escape load cell calibration
║
║
╠═
╠═ V
MV6 (mv/v constant)# (see text for format) Calibrate by mV/V - 1 pt. Calibrate by mV/V - 6 pt.
╠ ╠═ M (see text for format) Calibrate by Mass 2&5 pt.
║ ╠═ T (see text for format) Calibrate by Torque 2&5 pt.
║ ╠═ S (shunt value Lb)# Calibration by Shunt Value
║ ╚═ I Encoder counts per Inch
║ ╠═ V View counts/inch
║ ╚═ S(number)# Set counts/inch
║
╠═ L(lim) Limits
║ ╠═ V View current settings
║ ╠═ S (see text for format) Setup limit
║ ╠═ E Escape from limit setup
║ ╚═ R Manual reset for latch
║
╠═ O System Options
║ ╠═ V View current settings
║ ╠═ P (baudrate code) Printer baudrate
║ ╠═ I (0 or 1) Auto-Identify load cells
║ ╠═ Z (channel)(0 or 1) Auto-Zero load
║ ╠═ A (new address)# Com Address
║ ╠═ B (baudrate code) Com Baudrate
║ ╠═ L (0 or 1) Com Linefeed
║ ╠═ T (0 or 1) Retain Tare
║ ╚═ E (0 or 1) End of Transmission Char.
║
╚═ D Display Options
╠═ V View current settings
╠═
╠═ F
W (type)(level) (see text for format) Filter select Filter Window
╠═ D (channel)(number digits) Decimal digits max
╠═ C (channel)(countby code) Smallest count
╚═ 2 (B, L, T, or D) 2nd line shows a blank line, limits,
text, or a display.
╚═ T (text) Set the text displayed on 2nd line.
MODEL 9840 PG 31 PUB. 2856-16