2. Open the paper feeder, slide out the paper support and slide the left edge guide to the left. Then lower the output tray.

3.Fan a stack of paper, then tap paper on a flat surface to even the edges.

4. Load the paper with the printable side up so it is against the right edge guide, and slide it into the paper feeder. Then slide the left edge guide against the left edge of the paper. Make sure that the paper stack is loaded under the tabs inside the edge guides. You can load paper up to 20 sheets.

Note:

Make sure that the paper stack is flush with or lower than the triangular load-limit mark on the edge guide.

16