3.Hold the base so that the hooks are pointed down. Then position the base next to the bottom of the monitor, as shown below.
4.Insert the hooks on the base into the slots on the monitor.
5.Slide the base down toward the front of the monitor until the latch clicks into the locked position. Then turn the monitor upright so it rests on its base.
Note
Always remove the tilt and swivel base before packing and transporting the monitor. To remove the base, disconnect the power cord from the electrical outlet and disconnect the cables from the back of the monitor. Carefully set the monitor face down on a padded surface. While pressing the release tab on the bottom of the monitor, remove the base by lifting the hooks out of the slots.
6 17” Super VGA Color Monitor