4.Make sure your computer’s video adapter is set up for use with the monitor and that any DIP switches or jumpers in the computer or on a video adapter card are set properly. See your computer and/ or video adapter card manual for instructions.

5.Contact your Authorized EPSON Servicer; the monitor needs repair.

The power indicator is lit, but there is no image on the screen, the image is faint or scrambled, and/or the control box indicators are blinking sequentially.

1.Make sure the computer is turned on

2.Make sure the video interface cable is properly connected to the monitor’s D-sub VGA connector and to the computer’s video interface. See “Connecting the Monitor to Your Computer” on page 7.

3.Adjust the brightness and contrast controls.

4.The input signals may be outside the monitor’s horizontal and vertical frequency ranges (30 to 65 KHz horizontal and 50 to 120 Hz vertical). Make sure the input signals are within the specified ranges.

5.Make sure your computer’s video adapter is set up for use with the monitor and that any DIP switches or jumpers in the computer or on a video adapter card are set properly. See your computer and/ or video adapter card manual for instructions.

6.Check if you need to set up your application program(s) to match your monitor.

7.Contact your Authorized EPSON Servicer; the monitor needs repair.

17” Super VGA Color Monitor 19