Epson A882181 SELECT, UP, The image is not centered on the screen, The sides of the image ate not straight, The image control indicators are blinking

The image on the screen is misaligned when you use a particular application program.

Adjust the screen parameter settings as described in the “Adjusting Monitor Controls” section on page 11, or the “Adjusting the Screen Image” section on page 16.

The image is not centered on the screen.

Adjust the horizontal and/ or vertical position settings as described in “Adjusting Monitor Controls” on page 11.

The image is too big or too small for the screen.

Adjust the width and/ or height settings as described in “Adjusting Monitor Controls” on page 11.

The sides of the image ate not straight

Adjust the side pin cushion and trapezoid settings as described in “Adjusting Monitor Controls” on page 11.

There are colored spots on the screen (bad color purity) or the image is distorted.

Electromagnetic interference may be present. Move any devices that generate magnetism (such as telephones, televisions, speakers, or magnetic screwdrivers) away from the monitor. Then press the DEGAUSS button once to demagnetize the screen.

The image control indicators are blinking.

All 12 video mode memory locations are full. The microprocessor in the monitor will delete and replace the oldest non-permanent video mode with the new video mode when you adjust its screen parameters using the SELECT, UP, and DOWN buttons.

2017” Super VGA Color Monitor