When the monitor is about to delete a mode, all the parameter indicators blink until you adjust one or more of the screen parameters, indicating that you want the monitor to recognize and save a user-defined mode. See the “Adjusting the Screen Image” section below for instructions on how to adjust screen parameters.

The monitor accepts interlaced timing rates. However interlaced modes are not recommended because they may

g

Adjusting the Screen Image

To adjust screen parameter settings for any video mode, follow these steps:

1.Display the screen image you need to adjust. Then open the control box as described on page 10.

2.Press the SELECT button. The indicator (LED) for a screen parameter (such as Horizontal Position) lights up. If necessary, press the SELECT button again until the indicator for a screen parameter you want to adjust is lit.

3.Adjust the screen parameters using the UP and DOWN buttons as described in the table on page 11.

4.Press the SELECT button until the indicator for the next screen parameter (if any) you want to adjust is lit and then adjust the parameter.

5.Repeat steps 3 and 4 until you are satisfied with the image you see.

The monitor saves your settings even after you turn it off.

1617” Super VGA Color Monitor