CIS for Epson Stylus C43

Thank you for purchasing AT Continuous Ink Supply System. We appreciate your support and will try our best to make your experience with our products a pleasant one. Printing has been a different experience ever since you installed AT Continuous Ink Supply system on your own printer. Just imagining being able to print without regard to the ink level in those expensive little cartridges.

Please take your time installing AT Continuous Ink Supply system. Do not remove your old cartridge until you have the AT CIS system primed and ready to install (to prevent the drying of heads). In addition, make sure you are getting perfect nozzle checks before installing the AT CIS system. The AT CIS system won’t be able to work properly if the nozzles are previously clogged.

Most people get a perfect nozzle check the first time after installing the AT Continuous Ink Supply system; others may need to run two or three cleaning cycles or let the printer sit for a while before they get the perfect results.

1General Guide:

1) Components

 

 

 

 

 

 

 

ACIS system

1 set

 

BAir filters

4pcs

CSupport Arm 1 set

DRefill Kit

4pcs

 

EInstruction CD

1pc

 

 

 

 

 

 

 

 

 

 

2) Opening box inspection

aCheck whether all the accessories are ready.

bCheck whether there's leakage of CIS System, whether some tubes have been separated from CISS. If there is, please kindly to contact the local dealer.

cCheck whether there is air space in the tube. If the length of air space is more than 20cm, please clean the printer head for 2 or 3 times before printing.

2Printer testing:

1)Check whether the printer is in normal condition, like mechanical status, lubrication status etc.

2)Print testing lines to ensure the printing head is good condition.

3)Print pictures to see whether the printing image is ok.

3Installation Procedures:

1) First step

Page 2
Image 2
Epson C43 manual 、General Guide, 、Printer testing, 、Installation Procedures, First step