Fix the balance arm stick on the support arm as show on the picture, Rip the label on the shortest arm ,And Stick it on the right side of the printer, but need to keep it in the same horizontal line as show in the picture
(5)、The fifth step: Installing tubes
clip the tubes orderly on the arm, please kindly to see the above picture for reference.
(6)、The sixth step : Adjust the tubes which guide the ink
Adjust the tube length and move the cartridge car. Insure there will no block and collision when the tubes moving with cartridge car .Insure there's plenty length of tube to make the cartridge cart can thoroughly move to the right side.
The tube is excessive long, it The tube is twist ,it is not ok. In this situation ,it is ok is not ok.
