Epson c58 manual Set up the Continuous Ink Supply System, Fix supporting arm, 4Install the tubing

2) Set up the Continuous Ink Supply System

Press the “ink cartridge replace	Move the cartridge car	Uplug the power connector
Button”	to cartridge remove position

Open the cartridge cover to certain angle

use a small screwdriver to loosen		Circumgyrate the screwdriver clockwise
	the cartridge cover,	then remove the cartridge cover.

Remove the original cartridges Insert our no-sponge cartridge into printer carefully

3) Fix supporting arm

Tear off the sticker, and place one on the inner side of printer, and place another small tube clip on the right side of printer, as above picture shown.

4)Install the tubing.

Put the tube into the Support Arm and Small Tube clamp as the below picture shown.