Eiki LC-SD12 Remote Control Battery Installation, Parts Names and Functions, Remove the battery

Parts Names and Functions

Remote Control Battery Installation

1	Remove the battery
	compartment lid.

Pull up and remove the lid.

2	Slide the batteries into	3	Replace the compartment
	the compartment.		lid.

Two AAA size batteries For correct polarity (+ and

–), be sure battery terminals are in contact with pins in compartment.

To insure safe operation, please observe the following precautions :

–Use (2) AAA, SUM-4 or LR03 type alkaline batteries.

–Replace two batteries at the same time.

–Do not use a new battery with a used battery.

–Avoid contact with water or liquid.

–Do not expose the remote control to moisture, or heat.

–Do not drop the remote control.

–If a battery has leaked on the remote control, carefully wipe case clean and install new batteries.

–Risk of an explosion if battery is replaced by an incorrect type.

–Dispose of used batteries according to the instructions.

12