Eiki LC-SD12 owner manual Computer Input, Input Source Selection

Computer Input

Input Source Selection

Direct Operation

Choose Computer by pressing the INPUT button on the top control or the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Computer

Video

Menu Operation

Input Menu icon

1	Press the MENU button to display the On-Screen Menu. Press INPUT MENU
	the Point 7 8 buttons to move the red frame pointer to Input
	Menu icon.
2	Press the Point d button to move the red arrow pointer to
	Computer and then press the SELECT button. The Source
	Select Menu will appear.
3	Move the pointer to the correct input source and press the
	SELECT button.

Move the pointer (red arrow) to Computer and press the SELECT button.

Source Select Menu

RGB

Component

RGB (Scart)

When the input source is coming from a computer through the COMPUTER IN / COMPONENT IN terminal, select RGB.

See P31"Input Source Selection (Component, RGB- Scart 21-pin ) ".

See P31" Input Source Selection (Component, RGB- Scart 21-pin ) ".

Move the pointer to RGB and press the SELECT button.

22