Screen Size Adjustment, Computer Input, Normal, True, Wide

Computer Input

Screen Size Adjustment

This projector has a picture screen resize function, which enables you to customize the image size.

	1	Press the MENU button to display the On-Screen Menu. Press
		Press the MENU button to display the On-Screen Menu. Press
		the Point 7 8 buttons to move the red frame pointer to the
	2	Screen Menu icon.
	2	Press the Point d button to move the red frame pointer to the

		function that you want to select. Then press the SELECT button.

Normal

Provide an image to fit the screen size.

True

Provide image in its original size. When the original image size is larger than screen size ( 800 x 600 ), this projector enters “Digital zoom +” mode automatically.

Wide

Provide image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Digital zoom +

When Digital zoom + is selected, the On-Screen Menu disappears and the message “D. Zoom +” is displayed. Press the SELECT button to expand image size. And press the Point e d 7 8 buttons to pan the image. The panning function can work only when the image is larger than screen size.

A projected image can be also expanded by pressing the D.ZOOM e button on the remote control.

Digital zoom –

When Digital zoom – is selected, the On-Screen Menu disappears and the message “D. Zoom –” is displayed. Press the SELECT button to compress image size.

A projected image can be also compressed by pressing the D.ZOOM

▼button on the remote control.

To cancel Digital zoom +/– mode, press any button except the D.ZOOM edbuttons, the SELECT and the Point buttons.

Screen Menu icon

SCREEN MENU

Move the red frame to the function and press the SELECT button.

Note:

–This Screen Menu cannot be operated when 720p(HDTV), 1035i(HDTV) or 1080i(HDTV) is selected on PC System Menu. ( ☞ P23 ).

–True and Digital zoom +/– cannot be selected when 480i, 575i, 480p, 575p is selected on PC System Menu. ( ☞ P23 ).

–This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector.

–The image data in other than SVGA (800 x 600) is modified to fit the screen size in initial mode.

–The panning function may not operate properly if the computer system prepared on PC Adjust Menu is used.