Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically conform Fine sync, Total dots and Picture Position to your computer. This function can be operated as follows.
| Auto PC Adj. |
1 | Press the MENU button to display the |
| the Point 7 8 buttons to move the red frame pointer to the PC |
| Adjust Menu icon. |
2 | Press the Point d button to move the red frame pointer to the |
| Auto PC Adj. icon and then press the SELECT button twice. |
This Auto PC Adjustment can be also executed by pressing the Auto PC button on the remote control.
To store adjustment parameters :
Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in PC System Menu ( ☞ P23 ). Refer to " Store " of Manual PC Adjustment section ( ☞ P26 ).
Note :
–Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is
not provided properly through this function, manual adjustments are required. ( ☞ P25, 26 )
–Auto PC Adjustment function cannot be operated when 480p, 575p, 480i,
575i, 720p (HDTV), 1035i (HDTV) or 1080i (HDTV) is selected on PC SYSTEM Menu. ( ☞ P23).
PC Adjust Menu icon
PC ADJUST MENU
Move the red frame pointer to Auto PC Adj. icon and press the SELECT button.
24
