Eiki LC-SD12 Safety Instruction, Air Circulation, Installing the Projector in Proper Position

Models: LC-SD12

1 52
Download 52 pages 34.95 Kb
Page 6
Image 6
Safety Instruction

Safety Instruction

Air Circulation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.

Air Circulation CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

Do not put any flammable objects near the vent.

Keep the exhaust vent at least 3’(1m) away from any objects.

Do not touch a peripheral part of the exhaust vent, espe- cially screws and metallic part. This area will become hot while the projector is being used.

Do not put anything on the cabinet. The materials put on the cabinet will not only get damaged but also cause fire hazard by heat.

Cooling fans are provided to cool down the projector. This projector monitors internal temperature and control the run- ning speed of the cooling fans.

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce

the lamp lifetime and cause a fire hazard.

20˚

Do not tilt the projector more than 20 degrees above and below.

20˚

Do not point the projector up to pro-

ject an image.

NO UPWARD

Do not point the projector down to

project an image.

NO DOWNWARD

Do not put the projector on either

side to project an image.

NO SIDEWARD

Moving the Projector

When moving the projector, replace the Lens Cover and

Air Intake Ventretract Adjustable Feet to prevent damage to the lens and cabinet.

When the projector is not in use for an extended period, put it into the case (carrying bag) supplied with the projector.

Exhaust Vent (Hot air exhaust)

CAUTION

Carrying Bag (supplied) is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this bag, otherwise the projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put other things on the cabinet.

CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

Do not drop or bump a projector, otherwise damages or malfunctions may result.

When carrying a projector, use a suitable carrying case.

Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best way.

6

Page 6
Image 6
Eiki LC-SD12 Safety Instruction, Air Circulation, Installing the Projector in Proper Position, Moving the Projector