H is on | One of the ink cartridges is out of ink. Follow the instructions beginning |
| on page 28 to replace the empty cartridge. If the H ink out light remains |
| on after you’ve replaced a cartridge, you may have installed a cartridge |
| your printer can’t use. Check the number on the cartridge package to |
| make sure you’ve installed the correct cartridge. |
|
|
P and m are | Jammed paper may be blocking movement of the print head, or you |
flashing | may have an internal error. Turn off the printer, open the cover, and |
| check for any jammed paper. Also, make sure you removed all the |
| packing material, as described on the Start Here sheet. Then turn the |
| printer back on. If the error isn’t cleared, contact your dealer or EPSON. |
| See page 54 for contact information. |
|
|
P and H are on | An ink cartridge was installed incorrectly. |
| ■ If the print head is at the home position (at the far right as you face |
| the printer), open the printer cover and press the H ink cartridge |
| replacement button to move the cartridge holders to the |
| replacement position. Remove and reinsert any cartridge that |
| you’ve recently replaced. Make sure the cartridge clicks into place. |
| Close the printer cover and press the H ink cartridge replacement |
| button again to finish installation. |
| ■ If the cartridge holders are already in the replacement position, |
| remove and reinsert the ink cartridge. Then press the H ink |
| cartridge replacement button to finish installation. |
|
|
P, m, and H are | An unknown printer error has occurred. Turn the printer off and contact |
flashing | your dealer or EPSON as described on page 54. |
|
|
P is off | The printer is not receiving power. Try these solutions: |
| ■ Make sure the printer is turned on. |
| ■ Turn off the printer, plug in the power cord securely, and turn the |
| printer on again. |
| ■ Make sure the outlet is working and is not controlled by a switch or |
| timer. If in doubt, try another outlet. |
|
|
42