INSTALLATION
The C82305* /C82306* interface card is designed to be installed inside the printer. Installation or removal of the interface board is easy, and requires only a screwdriver.
The following section gives you detailed information on how to install your interface card in a variety of EPSON printers.
Caution
• Turn off the power to the printer and the computer before installing the serial interface. Make sure that all power and interface cables are removed.
•Avoid touching the printer’s circuit board contacts, as many of these components are sensitive to static electric charges that may build up on your body.
1.First, you may need to adjust the DIP switches and jumper settings.
If the screws don’t fit your interface cable, you will need to replace the connector lock nuts with the optional ones provided in this package.
Note
The original CS2305* lock nuts are imperial standard (inch), and the C82306* lock nuts are metric.
22