Epson C82315 SWITCH SETTlNGS

SWITCH SETTlNGS

You can select the features listed below by changing the switches to the settings indicated. Settings for switches 6 and 7 are different if HP LaserJet II (IBM 3812) emulation is selected (switch 4 is on and jumper J5 is disconnected).

Switch				Cable (Device) Address
	I	(ask the system manager for the correct						address)
		0	1	2	3	4	5	6	7
									Test
		Off	Off	Off	Off	On	On	On	On
		Off	Off	On	On	Off	Off	On	On
		Off	On	Off	On	Off	On	Off	On
Switch			Off				On
4		Emulates an IBM 4214/5224				Emulates an IBM 5219/3812
		printer				printer
5		Prints normally				Prints buffer diagnostic test
Non-HP LaserJet II mode
Switch			Off				On
6		Selects draft printing as the				Selects LQ printing as the
		default				default
7		Passes all commands from				Passes all commands from
		the host on to the printer.				the host on to the printer
		Select this if you want to set				except character pitch and
		pitch and print quality from				print quality commands.
		your software.				Select this if you want to set
						pitch and print quality from
						vour orinter’s control panel.

7