Command

 

Command

Number

Parameters Name/Description Examples

 

(HH..HH)

&%Z09,0(1B40)

 

Defines the string of hexadecimal values that are

 

sent to the printer as HH..HH

 

10Define User Custom command-pass-thru strings for details.

Defines up to eight strings (0-7) of commands (up to 25 characters can be included in the string). See User-defined command-pass-thru strings for details.

#(HH..HH)&%Z10,3(1B45) Defines string number # to be the character string defined by the hexadecimal values HH..HH

DISPLAY STATION SETUP MODE

When the printer is connected to a twin-axial cable that is also connected to a display station, you can display an interface setup screen showing various setup parameters. You can then change these parameters and save them in the interface memory.

See Appendix A-2 for an example of the setup screen.

Follow the steps below to change settings in display station setup mode.

1.Turn off the printer and all devices connected to the same twin-axial cable.

2.Disconnect the twin-axial cable from the IBM host computer, and make sure that at least one display station is connected to the cable and is turned on.

3.Turn off switch 8 to deactivate the twinax interface. Then make sure you have set a valid address other than 7 (switches 1,2,3), and turn on the printer.

4.Press the TEST button on the interface. The interface setup screen appears on the display station.

5.Use the cursor keys to move to settings you want to change. Use the backspace to delete old settings, then type in the new settings.

14