Introduction

This guide explains how to use the Type B IEEE 1394 Interface Card when attached to a printer.

Features

This interface complies with the IEEE 1394 standard, and is equipped with the following features:

❏It can be connected to Macintosh® FireWire® ports. The required printer driver is supplied with the interface card. The EPSON Monitor 3 utility can also be used to display the printer status on the computer.

Note:

DIP switch 10 must be set to ON (advanced mode) when connecting the printer to a Macintosh. See page 15.

❏High-speed data transfer is possible with IEEE 1394, which supports a peak data transfer rate of 400 Mbps.

❏The cable can be attached or detached without switching off the power to the computer or printer.

2