Sharp AR-NB3 operation manual Printer condition settings, Settings Description, Sided

WEB FUNCTIONS OF THE MACHINE

Printer condition settings

Factory default settings are indicated in bold.

Default settings

Item	Settings	Description
Copies	1-999	This is used to select the number of copies.
Orientation	Portrait, Landscape	This sets the orientation of the printed page. Select [Portrait]
		when the image is longer in the vertical direction, or [Landscape]
		when the image is longer in the horizontal direction.
Default Paper Size	A3, B4, A4, A4R, B5,	This sets the default paper size used for printing. Even if the
	B5R, A5, Ledger,	set size of paper is not in any of the trays, the printed image
	Legal, Foolscap,	is formed in accordance with this setting.
	Letter*, Letter-R,	*Factory default setting is A4 in some regions.
	Invoice
Default Paper Source	Auto, Tray 1,	Set the default paper tray.
	Tray 2*, Tray 3*,	*Selections available depend on the trays that are installed.
	Tray 4*, Bypass
	(Manual), Bypass (Auto)
Disable Blank Page Print	Enable, Disable	When this is set to "Enable", blank pages are not printed.
2-Sided Print	1-Sided,	When [2-Sided (Book)] is selected, two-sided printing takes place
	2-Sided (Book),	so as to allow binding at the left side. When [2-Sided (Tablet)] is
	2-Sided (Tablet)	selected, two-sided printing takes place so as to allow binding at
		the top. (Only for models that support two-sided printing.)
ROPM*	Enable, Disable	This enables the ROPM function. When enabled, multi-page
		print jobs are stored in memory before printing, and thus the
		computer does not need to repeatedly send the print data
		when multiple copies are printed.
		* This setting is only effective when the dual function board is
		installed.
PCL settings
Item	Settings	Description
Symbol Set	Select one of 35 sets.	This specifies which country's characters (PCL symbol set)
		are assigned to certain of the symbols in the character code
		list. The factory default setting is [PC-8].
Font	Select one internal or	This specifies which PCL font to use for printing. One font can
	one expansion font.	be specified from among the internal fonts and expansion
		fonts (when the barcode font kit or the Flash ROM kit is
		installed). The factory default setting is [0:Courier].
Line Feed Code	CR=CR; LF=LF;	This specifies the line break code by means of a combination
	FF=FF, CR=CR+LF;	of the "CR" (return) code, "LF" (line break) code, and "FF"
	LF=LF; FF=FF,	(page break) code. The factory default setting is printing
	CR=CR; LF=CR+LF;	based on the transmitted code. The setting can be changed
	FF=CR+FF,	by selecting one of four combinations.
	CR=CR+LF;
	LF=CR+LF;
	FF=CR+FF
Wide A4	Enable, Disable	This setting can be enabled to print 80 lines on A4 size paper
		with each line 10CPI font (English characters). When the
		setting is disabled (a checkmark does not appear), each line
		is 78 characters long.

PostScript settings

"PostScript Settings" only appears when the PS3 expansion kit is installed.

Item	Settings	Description
Print PS Errors	Enable, Disable	When this setting is enabled, an error description is printed
		each time a PostScript error occurs.

24