Sharp AR-NB3 Fitting The Print Image To The Paper, Click on the Fit to Page checkbox

PRINTING FROM WINDOWS

FITTING THE PRINT IMAGE TO THE PAPER

The printer driver can adjust the size of the print image to match the size of the paper loaded in the machine. Follow the steps shown below to use this function. The explanation below assumes that you intend to print a ledger or A3 size document on letter or A4 size paper.

To open the printer driver, see "BASIC PRINTING" (page 3).

The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.

Note ☞ PRINTING MULTIPLE PAGES ON ONE PAGE (page 10)

1 Click the [Paper] tab in the printer driver setup screen.

2 Select the original size (Ledger or A3) of the print image in "Paper Size".

or

3 Click on the [Fit to Page] checkbox.

When using the PS printer driver, select [Fit To Paper Size] in "Zoom Setting".

or

4 Select the size of the paper (Letter or	1
A4) that is loaded in the machine from
"Fit to Paper Size".

The size of the print image will be automatically adjusted to match the paper loaded in the machine.

Paper Size: Ledger or A3

Fit To Paper Size: Letter or A4

Ledger or A3 size	Letter or A4 size
document	paper
(Paper Size)	(Fit To Paper Size)

When using the PS printer driver, the print Note image can be enlarged or reduced by

means of numerical values. (The vertical and horizontal ratios can be set separately.) Select [XY-Zoom] in step 3, click the [Width/Length] button, and adjust the ratios in the screen that appears.

11