USING THE KEY OPERATOR PROGRAMS
BASIC PROCEDURE FOR CONFIGURING SETTINGS
Follow the steps below to access the key operator settings for the network and printer functions.
1 Press the [SPECIAL FUNCTION] key.
| The special function screen |
DUPLEX | will appear. |
| SPECIAL FUNCTION |
DUPLEX SCAN |
|
DUPLEX SCAN | ACC. |
|
2 Select "KEY OPERATOR PRG." with the [] or [] key.
| GH | SPECIAL |
| FUNCTION | |
|
|
|
|
| |
| PQR | PAPER | SIZE SET | ||
| DISPLAY | CONTRAST | |||
|
| ||||
DUPLEX |
| TOTAL | COUNT | ||
SPECIAL FUNCTION |
| ||||
DUPLEX SCAN |
| KEY | OPERATOR PRG. | ||
|
|
|
|
| |
3 Press the [OK] key. |
|
|
| ||
|
| Enter | key | operator | |
BACK OK |
| code. |
|
|
|
|
|
|
|
|
GHI | KEY OPERATOR CODE: |
| |
The key operator code | |
| |
entry screen will appear. |
|
6 Press the [OK] key.
OK | PRINTER |
|
| |
|
|
| ||
|
| NOTICE | PAGE | |
|
| FORCED | OUTPUT OF | |
|
|
|
| |
The settings of the |
| OUTPUT | TRAYS | |
|
|
|
| |
selected mode will |
|
|
|
|
appear. |
|
|
|
|
Example: The above screen shows the settings when printer mode is selected.
7 Select the desired program with the [] or [] key.
•A checkbox appears to the left of several of the programs. To enable a function (make a checkmark appear), press the [OK] key. To cancel a selection, press the [OK] key once again to remove the checkmark and disable the function. Go to step 9.
•When the [OK] key is pressed for a program that does not have a checkbox, the settings for the program appear.
4 Use the numeric keys to enter the key operator code.
OK | ABC | DEF | MODE | SELECT |
|
|
| ||
GHI | JKL | MNO | KEY | OP. # CHANGE |
|
|
| ||
PQRS | TUV | WXYZ | COPIER | |
|
|
| ||
FUNCTION |
| PRINTER | ||
ACC. |
| SCANNER |
•" " will appear for each digit entered.
•The mode selection screen will appear.
5 Select the desired mode with the [ ] or [] key.
8 Press the [OK] key and follow the instructions in the program screen.
OK
9 To use another program for the same mode, select the desired program with the [] or [] key.
To use a program for a different mode, press the [BACK] key and select the desired mode. To exit the key operator programs, press the [CA] key
( ).
MODE SELECT
KEY OP. # CHANGE COPIER PRINTER
SCANNER
32